LATEST MANGA UPDATES
Inline Two Piece 1-1/2 NPT Female 1-1/2 NPT Female Conbraco Industries 77C14701 Apollo 77C-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem Lever
Apollo 77C-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, Two Piece, Inline, Lever, 1-1/2' NPT Female: Household Rough Plumbing Valves: Industrial & Scientific. Apollo 77C-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, Two Piece, Inline, Lever, 1-1/2" NPT Female: Household Rough Plumbing Valves: Industrial & Scientific. The Apollo 77C-140 series two-piece inline full port ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. For resistance to corrosion, this valve is made of bronze and its ball and stem are made of stainless steel 16. The 1/4" to 2" sizes are full port for reduced friction; the inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. The 2-1/2" size is standard (or regular) port for reduced valve size and cost. The maximum pressure is 600 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and 10 for saturated steam, and the temperature range is -20 to 00 degrees Fahrenheit. It has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Multifill polytetrafluoroethylene (MPTFE) seats and seals reduce the risk of valve leakage. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-1 for quality assurance.. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 0 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.. Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 128 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 02:200 and makes products that meet ISO and American National Standards Institute (ANSI) standards.. . . . .